Riser (9mm x 100mm)
The Hurricane Fork Up Riser is designed to adapt standard front forks/ shocks (regular drop-outs) to fit racks with clearance problems such as disc brake calipers coming in contact with the rack as well as providing for easier installation of your bike onto the rack and better clearance between bikes.
The Fork Up Riser installs easily on your fork before loading it onto your rack. It’s easier then installing your front wheel! Once installed on the fork, just lift your bike up onto the rack and the Fork-Up fits easily into your rack with ample clearance for disc brakes and low hanging fork legs. Plus, the Fork Up is small enough to fit in your gear bag, and fits on just about any standard fork mount rack made.
Fit more bikes on your rack! The Fork Up Riser raises your fork approximately 3 inches above your rack to raise the handlebars higher then the bike next to it. Plus, the Riser can be rotated over 180 degrees to provide for additional fore-aft clearance with other bikes on the rack. This allows you to easily adjust the height and position of the bike on the rack so you can haul All your friends and family to the ride!
The Fork Up Riser fits racks better and makes installation easier then dealing with the dropouts on all the various brands of forks on the market. You should have a Fork Up for every spot on your rack!
- Equipped with quick release
- Fits all fork-mounted racks including Thule, Yakima, Rocky Mounts, Seasucker
- Welded certified steel body
- Built in safety tabs
- Durable powder coated finish
Any fork with standard drop-outs: Suspension or rigid, mountain or road bike. 9.0mm x100.0mm hub spacing
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: